This Stand is made from 18mm high quality Marine Plywood .

It has been designed as a quick solution to the initial problem of what to put the oven on while you decide exactly where its going .

The stand can be Assembled in about 5 minutes or less and you can be cooking with in 20 minutes

The stand has a drop down flap giving you somewhere to put the food going into or coming out of the oven

below the drop down flap and under the oven is a handy shelf  for storing all your bits and bobs

and below that enough space to store an impressive number of logs .

The stand will arrive untreated so we recommend that once assembled you give the stand at least 2 coats of exterior varnish.

On top of the stand you will need to place 4 50mm x 600mm paving slabs  Not Supplied  but available from any builders merchant or garden centre .

you will then seal the gap between the slabs with silicon sealer 

then cover the slabs with 25kg of building sand  as per the instructions on setting up your pizza oven .

Click here for link to setting up instructions . PDF File

Click on this link to see a short video on putting one of our stands together.

Please ensure that the stansd is on a hard or solid surface to stop it sinking into the ground . if you are setting the oven up in the garden then sink some concrete blocks into the grass and then put the stand on them .

Once you have Decided on the permanent placement of your oven you can simply brick up the sides of the stand using it as a guide and form work for your brick work

It truly is just as easy as that .

delivery for this item is free when ordered with one of our ovens